2MP WDR Pinhole IP Camera
SKU
PHF2MP-4
SKU: PHF2MP-4
- 1920 x 1080 high resolution
- 120dB WDR
- ROI codec
- On-board storage, up to 64GB
- Triple video streams
- Rotate mode
- Audio/Alarm IO
- 1920 x 1080 high resolution
- 120dB WDR
- ROI codec
- On-board storage, up to 64GB
- Triple video streams
- Rotate mode
- Audio/Alarm IO
Color | Gray |
---|---|
Camera Smart Features | Motion Detection |
Image Sensor | 1/3” Progressive Scan CMOS |
Min. Illumination | 0.009 lux@F1.2, AGC ON, 0 lux with IR |
Lens Type | Fixed |
Focal Length Fixed | 4MM |
Field of View Fixed | 75˚ |
Face Recognition | Not Applicable |
Day & Night | IR cut filter with auto switch |
Digital Noise Reduction | 3D DNR |
Wide Dynamic Range | True WDR 120dB |
Video Compression | H.264 / MPEG4 |
H.264 Codec Profile | Baseline/Main/High profile |
Bitrate Min. | 32 Kbps |
Bitrate Max | 16384 Kbps |
Max Resolution | 1920X1080, 30FPS |
Supported Resolutions | 1920X1080, 1280 X 720 |
Adjustable image Settings | Saturation, Brightness, Contrast, Sharpness. |
Backlight Compensation | Yes, Zone Configurable. |
Network Storage | NAS |
Alarm Triggers | Motion detection, tampering alarm, network disconnect, IP address conflict, storage exception |
Protocols | TCP/IP, HTTP, DHCP, DNS, DDNS, RTP, RTSP, PPPoE, SMTP, NTP, SNMP, HTTPS, FTP, 802.1x, Qos (SIP, SRTP, IPv6 optional) |
Interoperability | ONVIF, PSIA, CGI |
Security | Flicker less, heartbeat, mirror, user authentication, video mask, watermark |
Communication Interface | 1 RJ45 10 M / 100 M Ethernet interface |
Operating Conditions | (14°F ~ 140 °F) Humidity 90% or less (non-condensing) |
Power Supply | 12 VDC ± 10% , PoE (802.3af) |
Power Consumption | Max. 5W - 7W |
Weight | 1.1 lbs |
Onboard Storage | None |