Dealer Resources

Downloads

Hikvision Model # Conversion

Specification Sheets

Product spec sheets are now available on every product page. look for the PDF icon below the product image.

Control4 Driver

Arcdyn Control 4 Drivers can be used with either an NVR or a Camera. For both cases you will need to install a driver for each camera/channel you wish to pull into your Control 4 project.

- When connecting multiple cameras from an NVR, select the NVR channel in the properties of each driver, enable Virtual Host on the NVR, and set the driver http port to 65xxx.

- When connecting to a camera directly, just leave the channel selector at 1 and the http port at 80 (or whatever the camera is configured to).

**Note** the camera's third stream is only accessible on the camera directly. The camera must be on the LAN to access the third stream**

If you need any assistance installing our Control 4 Driver, call, chat, or email us at support@arcdyn.com

Arcdyn Events Driver Version 2 (h.264): Same as below, but adds snapshot channel selector to properties

Arcdyn Events Driver (h.264): Use this driver with EA controller projects or with any controller that requires H.264 Stream type.

Arcdyn EA/H.264 Driver: This is the older style EA/H.264 driver without any event or third stream integration.

Arcdyn HC/MJPEG Driver: Use this driver with HC controller projects or with any controller that requires MJPEG Stream Type.

Arcdyn PTZ Driver: Use this with PTZ Cameras

Arcdyn IR over IP Remote Control Driver - This driver allows for control of the NVR interface via the C4 Remote over the network. It is only compatible with NVR Firmware Version 4.21.005 Build 190703

Control 4 NVR Firmware

New Firmware:

NVR Firmware Version 4.21.005 Build 190703

Step-up Firmware:

If your current firmware is below Version 3.4.101, you will need to update to 3.4.101 before updating to 4.21.005. You can download 3.4.101 here: NVR Firmware Version 3.4.101 Build 181102

Compatible Models:

NOTE: This version of firmware only works with the models listed below. If you require an update for a model not listed, please contact support.

  • Carbon 80
  • Carbon 160
  • Obsidian 160
  • Obsidian 256
  • Obsidian 320
  • Titanium 320-32ch
  • Titanium 320-64ch

Legacy NVR Firmware:

Carbon 40 Firmware V3.4.92 Build 170527

Carbon 80 Firmware V3.4.92 Build 170527

Carbon 160 Firmware V3.4.92 Build 170527

Obsidian 256 Firmware V3.4.92 Build 170527

Obsidian 320 Firmware V3.4.92 Build 170527

Obsidian 320 Firmware V3.4.92 Build 170527

Sign up to receive referrals from Arcdyn